Related links
Media module and device additions on page 68
Broadband line additions
You must order, connect, configure and test the Broadband line (xDSL or cable modem) before
adding the line to the Branch Gateway.
Related links
Media module and device additions on page 68
Broadband line ordering on page 72
Broadband line connections on page 72
Broadband line configuration on page 72
Testing the Broadband link on page 72
Broadband line ordering
If you need to order the Broadband line, make sure that the service provider installs the line near the
physical location of the Branch Gateway and verifies that the line is working before you configure
the WAN on the Branch Gateway.
Related links
Broadband line additions on page 72
Broadband line connections
Connect a Broadband line.
Related links
Broadband line additions on page 72
Broadband line configuration
Configuration may be performed on site by connecting a laptop computer to the Services port of the
Branch Gateway, or remotely via a modem connected to the Branch Gateway or S8300, or remotely
over the network.
For information about connecting a laptop to the Services port, see Connecting a computer to the
Services port. For information about preparing a modem, see
Chapter 4: Connecting and enabling a
USB modem for remote access on page 56. For information about configuration, see Chapter 5:
Configuring the Branch Gateway on page 60.
Related links
Broadband line additions on page 72
Testing the Broadband link
About this task
Adding media modules and devices
February 2017 Installation and Upgrades for the Avaya Branch Gateway G430 72
Comments on this document? infodev@avaya.com
To Next Page
Loading...
