Configuring Other User Message Waiting Indication
About this task
This process allows a user to be configured with message waiting indication for another user's
mailbox.
Procedure
1. Open IP Office Manager and receive the system configuration.
2. Click User and select the individual user.
3. Select the Source Numbers tab.
4. Click Add.
5. In the Source Number field, enter U followed by the user name or extension. For example
enter U201.
6. Click OK.
7. Save the configuration back to the system.
Related links
Other Mailbox Message Waiting Indication on page 31
Configuring Hunt Group Mailbox Message Waiting Indication
About this task
This process can be used to give a user message waiting indication for a hunt group's mailbox.
For systems being centrally managed through System Manager, this task cannot be performed
using IP Office Manager launched from System Manager. You must first disable Under SMGR
Administration in Security Settings before you perform this task.
Procedure
1. Open IP Office Manager and receive the system configuration.
2. In the left navigation pane, click User.
3. Select the individual user who requires hunt group message waiting indication.
4. Click the Source Numbers tab.
5. Click Add.
6. In the Source Number field, enter H followed by the name of the hunt group. For example,
for the hunt group Main, enter HMain.
7. Click OK.
User mailbox configuration
September 2020 Embedded Voicemail Installation 32
Comments on this document? infodev@avaya.com
To Next Page
Loading...