Button Programming Actions
Action Description
Voicemail Collect Allows access to a mailbox to collect or leave messages. The mailbox and
action are determined by the associated telephone number. This takes the
form ?Name for message collection and #Name for leaving a message. The
Name variable must match the user or hunt group name set in the IP Office
configuration. On suitable phones the DSS key displays VMCol followed by the
name.
Voicemail Off This option switches the diversion of calls to the user or group mailbox off.
Voicemail On This option switches the diversion of calls to the user or group mailbox on.
When programmed on a DSS key, the action toggles so no separate Voicemail
Off key is required. On suitable phones the DSS key displays VMon.
Voicemail Ringback Off This option switches new message ringback notification off.
Voicemail Ringback On This option switches new message ringback notification on. When programmed
on a DSS key, the action toggles so that no separate Voicemail Ringback Off
key is required. On suitable phones the DSS key displays VMRB+.
Related links
Configuring buttons on page 61
Short Codes
Embedded voicemail supports a number of short code features.
Related links
Miscellaneous on page 59
Default short codes on page 62
Short code features on page 63
Default short codes
The following default system short codes can be used with Embedded VoicemailStandalone Voice
Mail.
Feature Code Description
Voicemail Collect *17 Users can access the mailbox
associated with their extension.
Table continues…
Miscellaneous
September 2020 Embedded Voicemail Installation 62
Comments on this document? infodev@avaya.com
To Next Page
Loading...