Configuring Hunt Group Mailbox Message Waiting Indication
About this task
This process can be used to give a user message waiting indication for a hunt group's mailbox.
For systems being centrally managed through System Manager, this task cannot be performed
using IP Office Manager launched from System Manager. You must first disable Under SMGR
Administration in Security Settings before you perform this task.
Procedure
1. Open IP Office Manager and receive the system configuration.
2. In the left navigation pane, click User.
3. Select the individual user who requires hunt group message waiting indication.
4. Click the Source Numbers tab.
5. Click Add.
6. In the Source Number field, enter H followed by the name of the hunt group. For example,
for the hunt group Main, enter HMain.
7. Click OK.
8. Repeats steps 3 through 7 for any other hunt groups for which the user requires message
waiting indication.
9. Select File > Save Configuration to merge the changes back to the system.
Related links
Other Mailbox Message Waiting Indication on page 31
Hunt group mailbox access
By default, no user has access to a hunt group mailbox until specifically configured for such
access. Hunt group mailboxes can be accessed using the following methods:
• Message Waiting Indication access
• Short code and button access
• Remote access
Related links
Hunt group mailbox configuration on page 36
Message Waiting Indication access methods on page 41
Short code and button access on page 41
Remote access on page 41
Hunt group mailbox configuration
September 2020 Embedded Voicemail Installation 40
Comments on this document? infodev@avaya.com
To Next Page
Loading...