• For user mailboxes, message waiting indication is provided to the user's phone extension
and to their user application (for example one-X Portal).
• For hunt group mailboxes, message waiting indication can be assigned to specified users.
• Various dialing short codes can be used to control voicemail features and for actions such as
collecting messages, leaving messages, and turning voicemail on and off. See
Default short
codes on page 62 for more information.
Related links
IP Office Embedded Voicemail on page 8
Embedded Voicemail Summary
Feature Details
Control Unit IP500 V2 and IP500 V2A
Memory type Uses the System SD Card
Compression method Uses G711. No VCM channels required.
Storage 25 hours maximum
For systems not running in subscription mode, 15 hours by default. An
additional 5 hours is added for each 2 additional channels licensed
(see below).
Maximum simultaneous
connections
6 channels maximum
For systems not running in subscription mode, 2 channels by default.
Additional channels require licenses.
Maximum individual message
length
Default 120 seconds.
Adjustable between 3 and 180 seconds
Auto attendants Yes. Up to 40.
Related links
IP Office Embedded Voicemail on page 8
Languages supported
Embedded Voicemail supports the following language prompt sets:
Locale
WAV folder
Arabic ara
Chinese – Cantonese zhh
Table continues…
Embedded Voicemail Summary
September 2020 Embedded Voicemail Installation 9
Comments on this document? infodev@avaya.com
To Next Page
Loading...