155088456mS PRN: LVM Flash A: NextFlashItemScan: Finished Scanning A:\lvmail\ITA
\*.*
155088462mS PRN: LVM Flash A: NextFlashItemScan: Finished Scanning A:\lvmail\*.*
155088462mS PRN: LVM Flash A: NextFlashItemScan: END-OF-LIST found
155088462mS PRN: LVM FlashMan: FiveMinuteActions: called 2006/11/15 10:10:02
155088520mS PRN: LVM FlashMan: FiveMinuteActions: Free: 955.9 MBytes ( 92% )
155088520mS PRN: 33 Hours 11 Minutes Approx. Remaining
155088520mS PRN: FMML Size: 27
7. Select Filters > Trace Options.
8. To include Embedded Voicemail events on the monitor trace, do the following:
a. On the Call tab, select the options that you want to monitor in the Embedded
Voicemail section.
b. On the System tab, select Print.
The Trace Color selection on the System tab is applied to Embedded Voicemail
events.
9. Click OK.
Result
Embedded Voicemail events are now shown in the Monitor trace when running. These events are
all prefixed LVM.
Related links
Mailbox Maintenance on page 65
Monitoring Embedded Voicemail housekeeping
About this task
Embedded Voicemail performs housekeeping approximately every 5 minutes, subject to other
system activity. You can observe the Embedded Voicemail housekeeping by enabling the House
Keeping trace option.
Procedure
1. From the Start menu, select Programs > IP Office.
2. Select Monitor.
3. Select File > Select Unit. The Select System to Monitor window opens.
4. Enter the Control Unit IP Address and password. Depending on how the system is
configured, the password required is either the system password or the separate monitor
password if set.
5. Select Filters > Trace Options.
6. On the All Settings window, under Embedded Voicemail, click the check box for
Housekeeping to select this option.
Monitoring Embedded Voicemail housekeeping
September 2020 Embedded Voicemail Installation 67
Comments on this document? infodev@avaya.com
To Next Page
Loading...