Installing IP500/IP500 V2 Page 109
15-601042 Issue 28c (19 August 2013)IP Office 9.0
Initial Configuration Using IP Office Manager: Extension Numbering
b.
Change the Base Extension number to match the user extension who should now be associated with that
extension port by default.
c.
Click OK. IP Office Manager will probably give a validation error message due to a user being associated with
two extensions. This can be ignored until all the user moves have been completed.
3.
If changing several users repeat the processes as required.
4.
Click to revalidate the configuration and check that no conflicts between users and associated extensions.
5.
If the configuration changes are complete, send the configuration back to the IP Office and select appropriate
settings for the reboot.
To Next Page
Loading...
