Avaya IP500 V2 - Adding Music on Hold Files

Installing IP500/IP500 V2 Page 82
15-601042 Issue 28c (19 August 2013)IP Office 9.0
4.4.6 Adding Music on Hold Files
By default the IP Office will use internal music on hold by uploading a music file from the IP Office Manager PC. For IP500
V2 systems, you can load a file onto the System SD card prior to installing it in the IP Office.
The file must be of the following format and must be called holdmusic.wav.
Property
Value
File Type
WAV
Bit Rate
128kbps
Audio sample size
16 bit
Channels
1 (mono)
Audio Sample Rate
8 kHz
Audio Format
PCM
Length
Up to 90 seconds.
To loading a music on hold file onto a System SD card
1.
Rename the music file holdmusic.wav.
2.
Using a card reader, copy the file into the /system/primary folder on the System SD memory card.
3.
If the IP Office is or will be configured for additional hold music files (up to 3 additional files), copy those files to the
same location. The name of the additional files must match those specified in the IP Office system's configuration.