Avaya IP500 V2 - Tapi

Installing IP500/IP500 V2 Page 381
15-601042 Issue 28c (19 August 2013)IP Office 9.0
System Components: Applications
10.14.11 TAPI
IP Office TAPI is a client PC application that allows TAPI compliant applications to interact with the IP Office. The IP Office
TAPI software can be used in one of two modes, depended on whether it is licensed or not. The same software is installed
in either case with the licenses, if any, being entered in the IP Office system configuration.
· 1st Party TAPI
In this unlicensed mode the TAPI software supports control of an individual user's associated extension, allowing a
TAPI compliant application to answer (requires a phone that supports handsfree answer) and make calls.
· 3rd Party TAPI
In this licensed mode, TAPI software can be used to control call function on multiple user extension. This mode is
used with CTI Developer applications.
Details
DVD
IP Office Release 9.0 User/Admin DVD Set (2) (700506051) (Disk 1)
License
Optional. Licenses are required for 3rd party TAPI mode operation. See CTI Licenses .
PC Requirements: 1st Party TAPI
Minimum PC Requirements
RAM
64MB
Hard Disk Free Space
50MB
Processor:
- Pentium
PIII 800MHz
- Celeron
Celeron 3 800Mhz
- AMD
Athlon B 65-0MHz
Operating System Support
Server OS:
2003 Server
2008 R2 Server
2012 Server
Client OS:
XP Professional
Vista
Windows 7
Windows 8
· Where supported, Windows 7 support is
only on Professional, Enterprise and
Ultimate versions.
PC Requirements: 3rd Party TAPI
Minimum PC Requirements
RAM
64MB
Hard Disk Free Space
50MB
Processor:
- Pentium
PIII 800MHz
- Celeron
Celeron 3 800Mhz
- AMD
Athlon B 65-0MHz
Operating System Support
Server OS:
2003 Server
2008 R2 Server
2012 Server
Client OS:
XP Professional
Vista
Windows 7
Windows 8
· Where supported, Windows 7 support is
only on Professional, Enterprise and
Ultimate versions.
414