Installing IP500/IP500 V2 Page 149
15-601042 Issue 28c (19 August 2013)IP Office 9.0
Additional Processes: Rebooting a System
8.3 Changing Components
Except for memory cards (see Memory Card Removal ), cards and external expansions modules must only be removed
and added to an IP Office system when that system is switched off .
In the sections below, the term component can refer to a card fitted into the IP Office or an external expansion module.
Note that for extension ports, by default both an extension entry and a user entry will exist in the IP Office configuration.
Extension entries can be deleted without deleting the corresponding user entry. This allows retention of the user settings
and association of the user with a different extension by changing that extensions Base Extension number to match the
user's Extension ID.
Processes
· Like for like replacement
· Higher capacity component replacement
· Lower capacity component replacement
· Adding a new component
· Permanent removal of a component
· Replacement with a different type of component
140
145
150
150
150
150
151
151
To Next Page
Loading...
