No. Name Description
1 5V DC Jack To connect the power supply.
2 Network port To connect the Ethernet cable.
3 PC port To connect the computer.
4 Headset Jack To connect the headset.
5 Handset Jack To connect the handset.
6 WLAN Module Panel To integrate the Wi-Fi module.
Note:
WLAN Module Panel is not provided in
Avaya J169 Phone.
Optional components
You can use the following optional components with phone:
• 5V DC Power adapter
• Button module (JBM24)
• J100 Wireless Module
• GSPPOE - Avaya 48V PoE power inserter
Optional components
May 2018 Using Avaya J169/J179 IP Phone SIP in third-party call control setup 15
Comments on this document? infodev@avaya.com
To Next Page
Loading...
