Avaya J169 - Bridged Call Appearance

Bridged Call Appearance
Bridged Call Appearance is a unique extension number that is shared among multiple users to
communicate through a single call appearance. You can make, receive, and join a call on behalf of
the owner by using the bridged appearance. The bridged appearance might display the bridge
owner’s identity on the receiver’s display screen.
Making a call on a bridged line
About this task
Use this procedure to make a call on another user’s bridged line.
Before you begin
Ensure that the required bridged line is idle.
Procedure
1. Press the line key of the bridged number that you want to use.
2. Enter the number by using the dial pad.
The phone initiates the call when the inter digit timer times out.
Answering a bridged line call
About this task
When you receive a call from a bridged line, the phone screen displays the bridge owner’s identity.
If you receive more than one bridged call, the phone screen highlights the recent bridged call.
Procedure
1. Do one of the following:
• Lift the handset.
• Press Speaker.
• Press OK.
• Press the Answer softkey.
2. (Optional) For multiple bridged call appearances, do the following:
a. Press the line key of the bridged number that you want to answer.
b. Continue with Step 1.
Joining a call on a bridged line
Procedure
1. On the phone screen, select an active bridge line number.
2. Press Bridge.
Features
May 2018 Using Avaya J169/J179 IP Phone SIP in third-party call control setup 53
Comments on this document? infodev@avaya.com