Note:
J169 phone does not supports Wi-Fi feature.
Procedure
1. Press Main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Network, and press Select.
4. Scroll to Network mode.
The Network mode shows following two options:
• Ethernet: To connect to a Ethernet network.
• Wi-Fi: To connect phone to Wi-Fi network.
5. Press one of the following:
• Change
• Right arrow key
• Left arrow key
6. Press one of the following:
• Save
• OK
Related links
Enabling Wi-Fi on page 76
Setting the network configuration on page 77
Enabling Wi-Fi
About this task
Note:
J169 phone does not supports Wi-Fi feature.
Before you begin
• Ensure that the Wi-Fi module is installed in your phone.
• Ensure that the feature is activated by your administrator.
Procedure
1. Press Main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Network, and press Select.
Customization
May 2018 Using Avaya J169/J179 IP Phone SIP in third-party call control setup 76
Comments on this document? infodev@avaya.com
To Next Page
Loading...
