Chapter 7: Customization
Phone
Setting the dialing mode
About this task
Use this procedure to set the dialing method used to initiate dialing.
Procedure
1. Press Main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Phone, and press Select.
4. Scroll to Dialing mode.
5. Press Change to select one of the following options:
• Manual: Press the Call softkey to start a call.
• Auto: The dialed digits must match the dialplan to start a call.
6. Press Save.
Related links
Making a call by using the dial mode on page 23
Displaying сall timers
About this task
Use this procedure to display the duration of calls.
Procedure
1. Press Main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Phone, and press Select.
May 2018 Using Avaya J169/J179 IP Phone SIP in third-party call control setup 57
Comments on this document? infodev@avaya.com
To Next Page
Loading...
