Avaya J169 - Holding a Call; Taking a Call Off Hold

5. Scroll down to List Style and press one of the following:
• Expanded
• Compact
6. Press one of the following:
• Change
• Right Arrow key
• Left Arrow key
7. Press one of the following:
• Save
• OK
Enabling SAC when DND is active
About this task
When your presence status is set to Do Not Disturb, use this procedure to enable the Send All
Calls (SAC) feature to redirect calls.
Before you begin
Ensure that the Send All Calls feature is activated by your administrator.
Procedure
1. Press Main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Applications, and press Select.
4. Scroll to Presence Integration, and press Select.
5. Scroll to DND invokes SAC.
6. Press Change, and set the value to Yes.
7. Press Save.
Customization
May 2018 Using Avaya J169/J179 IP Phone SIP in third-party call control setup 66
Comments on this document? infodev@avaya.com