3. Select Call Priority.
4. In the Precedence Selection screen, select the priority level.
5. Enter the extension from one of the following:
• Contacts
• Recents
• Dial extension from dialpad
Making a precedence call by using dial plan configuration
About this task
Use this procedure to make a precedence call manually by dialing the extension number.
Before you begin
Ensure that the Dial plan is configured on the Local Session Controller or Enterprise Session
Controller with the Feature Access Code (FAC).
Procedure
1. Lift the handset or press one of the following:
• Speaker
• Headset
• Corresponding line button
2. Dial the FAC followed by the extension number.
Team Button
If the administrator has configured the Team Button feature for your phone, you can monitor
another phone to:
• See if the monitored phone redirects calls to another phone.
• See if the monitored phone has an active call.
• Answer any of the calls that are ringing on the monitored phone.
• Make a speed dial call to the monitored phone by pressing the Team Button softkey when the
monitored phone does not have an active call.
• Transfer an active call to the monitored phone by pressing the Team Button softkey.
The call redirection feature, SAC, CFWD, or ECF, might be active on the monitored phone. The
monitoring phone can override call redirection when speed dialing or transferring an active call to
the monitored phone. The override feature ensures that the call made to the monitored phone
rings on the monitored phone and is not routed to the redirected number.
Advanced features
May 2018 Using Avaya J169/J179 IP Phone SIP in third-party call control setup 50
Comments on this document? infodev@avaya.com
To Next Page
Loading...
