• OK
The phone puts the first call on hold and moves to the second call.
Ignoring a call
About this task
Use this procedure to ignore an incoming call alert. If you ignore a call while you are on a call, you
can use the Up and Down Arrow keys to select the call and then answer the call.
Procedure
On the Incoming phone screen, press Ignore softkey.
The phone turns off the audio alert.
Call related features
Muting and unmuting a call
Procedure
1. To mute an active call, press Mute.
The Mute button is illuminated.
2. To unmute the call, press Mute again.
Placing a call on hold and resuming the call
Procedure
1. To put an active call on hold, press Hold.
2. To resume the call, press one of the following:
• Resume
• OK
Call related features
May 2018 Using Avaya J169/J179 IP Phone SIP in third-party call control setup 27
Comments on this document? infodev@avaya.com
To Next Page
Loading...
