Avaya J169 - Call Forwarding to Your Cell Phone Using EC500

2. Press one of the following:
• Select
• OK
3. Scroll to Whisper page, and press Select.
4. Enter the extension number that you want to call.
5. Press one of the following:
• Enter
• OK
6. Deliver the message when your call is received.
Example
You are on a call with users A, B, and C. You have an urgent message for user A. When you use
the Whisper page feature to deliver a message to user A’s extension, all three users hear the tone
that signals the page, but only user A hears the message.
Call forwarding to your cell phone using EC500
About this task
Use this procedure to receive an incoming call of your Avaya phone on your personal phone,
when you are away from your desk.
Before you begin
• Ensure that the feature is activated by your administrator.
• Ensure that you administrator sets your personal phone number as your destination number.
Procedure
1. Press Main menu, and scroll to Features.
2. Press one of the following:
• Select
• OK
3. Scroll to EC500, and press one of the following:
• Select
• OK
• Corresponding line button
Features
May 2018 Using Avaya J169/J179 IP Phone SIP in third-party call control setup 39
Comments on this document? infodev@avaya.com