Avaya J169 - Setting Screen Saver Details; Adjusting the Brightness of a Phone Screen

Setting screen saver details
About this task
Use this procedure to change the time that elapses before the phone displays a screen saver and
to enable clock display on the screen saver.
Procedure
1. Press Main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Display, and press Select.
4. Scroll to Screen saver details, and press Select.
5. To change the screen saver time, scroll down to Screen saver timer, and do one of the
following:
You can enter any value from 0 to 999.
• Press (+) softkey to increase the minutes value.
• Press (-) softkey to decrease the minutes value.
6. To enable clock on the screen saver, scroll to Clock, and press Change.
7. Press one of the following:
• Select
• OK
Adjusting the brightness of a phone screen
Procedure
1. Press Main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Display, and press Select.
4. Scroll to Brightness.
5. Press one of the following:
• Select
• OK
The phone displays the following list:
• Phone
• Name of the button module attached to the phone.
Customization
May 2018 Using Avaya J169/J179 IP Phone SIP in third-party call control setup 72
Comments on this document? infodev@avaya.com