Avaya J169 - Setting a Personalized Ring Tone

2. Scroll to Settings, and press Select.
3. Scroll to Audio, and press Select.
4. Scroll to Headset profile, and press Select.
5. Scroll to the profile that matches your headset.
6. Press Change.
7. Press one of the following:
• Save
• OK
Setting a personalized ring tone
About this task
Use this procedure to set a ring tone for different uses.
Procedure
1. Press Main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Audio, and press Select.
4. Scroll to Personalize ringing, and press Select.
5. Scroll to one of the following options:
• Primary
• Team Key
• Bridged CA
• Call Pickup
6. Press one of the following:
• Select
• OK
7. Scroll to the ringtone, and press Select.
8. (Optional) To play the ringtone, press Play.
9. Press Save.
Customization
May 2018 Using Avaya J169/J179 IP Phone SIP in third-party call control setup 70
Comments on this document? infodev@avaya.com