6. Press one of the following:
• Replace: To replace the contact with another contact.
• Clear: To remove the contact from the Speed Dial.
7. Press Replace or Clear when the phone prompts for confirmation.
Setting Mute alert
About this task
Use this procedure to receive a notification alert when your phone is on mute and you try to
answer a call.
Procedure
1. Press Main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Phone, and press Select.
4. Scroll to Mute alerting option.
5. Press Change to select one of the following:
• Audible: The phone beeps to notify that you have muted your phone.
• Visual: The phone displays the mute icon after some time on the phone status line.
• Both: The phone beeps and displays a mute alert message .
• None: The phone disables the mute alert.
6. Press one of the following:
• Save
• OK
Setting Visual alerting
About this task
Use this procedure to illuminate the beacon LED when there are incoming calls and messages.
Procedure
1. Press Main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Phone, and press Select.
4. Scroll to Visual alerting.
Customization
May 2018 Using Avaya J169/J179 IP Phone SIP in third-party call control setup 60
Comments on this document? infodev@avaya.com
To Next Page
Loading...
