4. Scroll to Network config.
The Network configuration shows following two options:
• Auto: To automatically connect a network.
• Manual: To manually connect to a network.
5. Press one of the following:
• Change
• Right arrow key
• Left arrow key
6. Press one of the following:
• Save
• OK
Related links
Setting the network mode on page 75
Backup and restore
Backup and restore overview
The phone supports the backup and restoration of the following user-specific data:
• User contacts
• Local ring type
• Local Do Not Disturb status
• Local call forward settings
• Auto-answer mode configuration
• Speed dial settings
• Language
• Time zone and time format
• Date format
Backup process is initiated only after retrieval of user-specific data is successful.
Backing up and restoring data
Before you begin
Ensure that the system administrator sets the URI for backup and restore.
Customization
May 2018 Using Avaya J169/J179 IP Phone SIP in third-party call control setup 78
Comments on this document? infodev@avaya.com
To Next Page
Loading...
