3. Scroll to Audio, and press Select.
4. Use the Down Arrow key to go to the Error Tones screen.
5. Press Change to turn error tones on or off.
6. Press Save.
Setting Headset mic level
About this task
Use this procedure to adjust the best headset performance.
Before you begin
• Ensure that you are on a call and the caller’s audio level is at 50%.
• Adjust the microphone position as recommended by your headset vendor.
Procedure
1. Press Main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Audio, and press Select.
4. Scroll to Headset mic level, and press Select.
5. Press one of the following:
• Right arrow key: To increase the gain level.
• Left arrow key: To decrease the gain level.
6. (Optional) To set the default gain level, press Default.
Related links
List of headset profile on page 68
List of headset profile
Headset Profile
Description
Profile 1 Default
Profile 2 • Plantronics: SupraPlus
®
Wideband HW251N/
HW261N (HIS)
• Sennheiser: SH 330/SH 350, CC 510/CC 550
(CAVA-31)
Profile 3 • Plantronics: EncorePro
®
HW291N/HW301N (HIS)
• Sennheiser: Circle
™
SC 230/260 (CAVA-31)
Profile 4 • Jabra: BIZ
™
2400 (GN1216)
Table continues…
Customization
May 2018 Using Avaya J169/J179 IP Phone SIP in third-party call control setup 68
Comments on this document? infodev@avaya.com
To Next Page
Loading...
