2. (Optional) To navigate through Main menu, scroll to the following:
a. Applications, and press Select.
b. Contacts, and press Select.
3. Select the contact, and press Details.
4. Scroll to the active ringtone, and press Edit.
The phone screen displays the Select ringtone window.
5. Scroll down to the ringtone that you want to assign, and press Select.
6. (Optional) To play the ringtone, press Play.
7. Press one of the following:
• Save
• OK
Managing Conference calls
Adding a person to an active call
About this task
Use this procedure to add participants to an active call to set up a conference call.
Before you begin
Start a call.
Procedure
1. During a call, on the Phone screen, press More > Conf.
The phone puts the existing call on hold.
2. To make a call to a participant, do one of the following:
• Dial the phone number by using the dial pad.
• Call the person from the Contacts list or the Recents list.
• Redial the last dialed number by using the Redial softkey.
3. When the third participant answers the call, press the Join softkey.
4. To add another person, press Add and repeat Step 2 and 3.
Adding a person on hold to a conference call
Procedure
1. In the Phone screen, select your active call.
2. Press Conf or Add if you are already in a conference.
Call related features
May 2018 Using Avaya J169/J179 IP Phone SIP in third-party call control setup 33
Comments on this document? infodev@avaya.com
To Next Page
Loading...
