Avaya J169 - Assigning Speed Dial Entries

6. Press Save.
Related links
Redialing a number on page 23
Assigning Speed Dial entries
About this task
Use this procedure to assign speed dial numbers to your contacts. You can assign up to nine
speed dial entries.
This feature is only available in the Avaya Aura
®
environment.
Procedure
1. Press Main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Phone, and press Select.
4. Select Assign speed dial entries.
5. Use the Up and Down Arrow keys to select a Speed Dial number.
6. Press Contacts to select a contact.
7. Press Select to assign the contact to the selected Speed Dial number.
You can assign only one contact.
Related links
Making a call using speed dial on page 24
Replacing and clearing a Speed Dial contact
About this task
Use this procedure to replace or remove a Speed Dial contact.
Before you begin
Assign a contact to a Speed Dial number.
Procedure
1. Press Main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Phone, and press Select.
4. Select Assign speed dial entries.
5. Use the Down Arrow key to go to the Speed Dial contact that you want to replace or clear.
Phone
May 2018 Using Avaya J169/J179 IP Phone SIP in third-party call control setup 59
Comments on this document? infodev@avaya.com