• OK
Result
The phone makes a call to the monitored extension.
Transferring a call to a monitored phone
About this task
Use this procedure to transfer an active call to a monitored phone. If the monitored phone has an
active call redirection feature and you can override the feature, the monitored phone rings for 30
seconds. If no one answers the call during this time, the system redirects the call to the redirected
number.
Before you begin
You must be on an active call.
Procedure
1. Go to the Features screen.
2. Scroll to choose the monitored phone to which you want to transfer the active call and
press one of the following:
• Select
• OK
The system puts the active call on hold and rings the monitored phone.
3. To complete the transfer, perform one of the following actions:
• Press the Complete softkey.
• On-hook the handset.
• Press the Speaker button.
Monitoring other extensions at a glance
About this task
Use this procedure to monitor phones for others. You can see whether an extension you cover is
idle or busy at a glance. Extensions you can monitor with busy indicators show the word Busy
next to the extension number.
Before you begin
Ensure that the feature is activated by the administrator.
Procedure
1. From the Phone screen, scroll to the System Numbers.
2. If necessary, scroll to the line button for the extension you want to check. If that extension
is in use, the Busy Indicator displays next to the Busy.
Advanced features
May 2018 Using Avaya J169/J179 IP Phone SIP in third-party call control setup 52
Comments on this document? infodev@avaya.com
To Next Page
Loading...
