Enabling and disabling Bluetooth
About this task
You can use Bluetooth enabled devices with your phone.
Before you begin
• Ensure the wireless module is installed in your phone.
Procedure
1. Press the Main menu.
2. Scroll to Settings and press Select.
3. Scroll down to Bluetooth, and press Select.
4. Scroll to Bluetooth headset, and press one of the following:
• Toggle: To enable or disable Bluetooth.
• Right Arrow key: To enable Bluetooth.
• Left Arrow key: To disable Bluetooth.
Note:
For some Bluetooth headsets, volume can be adjusted during the first call after
rebooting the phone. Toggle the slider of the pop-up panel to the right to increase the
volume, and to the left to decrease it.
Pairing a Bluetooth enabled headset with your phone
About this task
You can pair a maximum of ten Bluetooth enabled headsets with the phone, but you can use only
one headset at a time. The phone displays the list of available devices and paired devices.
Before you begin
• Ensure the wireless module is installed in your phone.
• Ensure that the administrator activates the feature. Contact your administrator for details.
• Ensure your Bluetooth headset is in pairing mode.
Procedure
1. Press the Main menu.
2. Scroll to Settings and press Select.
3. Scroll down to Bluetooth, and press Select.
4. Scroll to Devices, and press Select.
The phone scans and displays the list of Bluetooth enabled devices.
Audio
April 2021 Using Avaya J189 SIP IP Phone in Avaya Aura
®
119
Comments on this document? infodev@avaya.com
To Next Page
Loading...
