Avaya J189 - Busy Indicator; Busy Indicator icons and LED indication

• Dynamic: Sets the acoustic feature to Dynamic, which activates itself and gradually
reduces the loud volume of the phone conversations to prevent from reaching the
damaging decibel levels.
• 4 hours: Sets the acoustic protection for 4 hours.
• 8 hours: Sets the acoustic protection to 8 hours.
6. Press Save.
Related links
Setting a headset profile on page 122
Multiple Device Access
With the Multiple Device Access (MDA) feature, you can register up to 10 SIP devices with the
same extension to transfer active calls between devices.
This feature is available only in an Avaya Aura
®
environment. Multiple Device Access is configured
on Avaya Aura
®
Session Manager.
MDA limitations
The limitations for Multiple Device Access are the following:
• There is no audio or visual alerting for the third incoming call if two call appearances are
already in use.
• When you receive an MDA indication, press the Phone button to view the details and join the
bridged call.
Related links
Handling calls and conferences using Multiple Device Access on page 92
Adding a participant to no hold conference on page 95
Handling calls and conferences using Multiple Device Access
About this task
With the Avaya Aura
®
and Multiple Device Access feature, you can have up to ten devices
configured with the same extension number. You can use this extension number to transfer active
calls between your devices.
Before you begin
Ensure that the system administrator has activated the Multiple Device Access feature (MDA) for
your extension.
Procedure
1. Initiate a call from your phone.
Advanced features
April 2021 Using Avaya J189 SIP IP Phone in Avaya Aura
®
92
Comments on this document? infodev@avaya.com