Avaya J189 - Putting a conference call on hold and resuming a call

Procedure
1. Press Main menu, and scroll to Features.
2. Press Select.
3. Scroll to Automatic Callback, and press Select.
When you end the callback call, the phone deactivates the feature automatically.
Autodialing a pre-assigned number
About this task
The autodialing feature enables you to quickly call the pre-assigned numbers. While your phone is
off-hook, on-hook, and from line key. Your system administrator might set up few frequently called
numbers, such as the IT Help Desk for autodialing. These numbers are displayed on the phone
screen.
Before you begin
Ensure that your system administrator has set up few frequently called numbers to use this
feature.
Procedure
Do one of the following to autodial a number:
• If your phone is on-hook, choose the number which appears on your phone screen, and press
the Call soft key or the OK button.
• If your phone is off-hook, the autodialing screen appears, press the required line key.
• You can choose a number from the Expansion Module and press the required line key.
Blocking your extension from displaying during calls
About this task
You can override the system (default) setting to display your extension on outgoing calls. Use the
Calling Party Number Blocking feature to prevent your number from displaying.
Procedure
1. From the Phone screen, access the Features screen.
2. Select CPN Block.
3. Enter the extension number you do not want the called party to see.
4. Press Enter or OK to start calling party number blocking.
Autodialing a pre-assigned number
April 2021 Using Avaya J189 SIP IP Phone in Avaya Aura
®
73
Comments on this document? infodev@avaya.com