Chapter 2: Avaya J189 phone overview
Phone overview
Avaya J189 IP Phone is a SIP-based phone for business communications. The phone supports 96
buttons. The primary display of the phone provides 96 buttons by scrolling or paging using the
Navigation Cluster. Optionally, the phone supports up to two Avaya J100 Expansion Module. The
Secondary screen is the first effective button module. The phone supports up to 5 call
appearances with two lines of call display.
For more information about Avaya J100 Expansion Module, see Using Avaya J100 Expansion
Module for SIP in
https://support.avaya.com/.
Avaya J189 IP Phone has two color display.
The phone supports the OPUS Super wideband codec and Local Conference.
Physical specifications
• 10 buttons on Primary display and 6 buttons on Secondary display with red and green dual
LEDs
• Primary display- 800 x 480 pixels, Secondary display- 240 x 320 pixels
• Dual-position stand, optional wall mount
• Gigabit Ethernet (10/100/1000 Mpbs) line interface
• Secondary Gigabit Ethernet (10/100/1000 Mpbs) interface
• PoE Class 2 IEEE 802.3af when PoE Slideswitch is in L position, and PoE Class 3 IEEE
802.3af when PoE Slideswitch is in H position
• Optional AC to 5V adapter
• Wideband audio in handset and headset
• SuperWideBand RJ9 headset
• Full duplex speakerphone
• SuperWideBand Full Duplex Handsfree
• Ergonomic hearing aid compatible handset supports TTD acoustic coupler
• Five call appearances in Full Screen mode and 10 call appearances in Half Screen mode
• Four soft keys and two page keys for the secondary display
• Type-A and Type-C USB support
April 2021 Using Avaya J189 SIP IP Phone in Avaya Aura
®
13
Comments on this document? infodev@avaya.com
To Next Page
Loading...
