8. If the security is 802.1x EAP, enter the following:
• Identity: Either your personal user ID or the shared user ID provided by your system
administrator.
• Anonymous Identity: Leave blank or use the shared Anonymous Identity provided by
your system administrator.
• Password: Either your personal password or the shared password provided by your
system administrator.
Result
If the credentials are authenticated successfully, the phone automatically restarts to complete the
connection.
Setting the network mode
April 2021 Using Avaya J189 SIP IP Phone in Avaya Aura
®
27
Comments on this document? infodev@avaya.com
To Next Page
Loading...
