9600 Series IP Deskphone Installation
22 9600 Series H.323 Deskphones Release 6.0 Installation and Maintenance Guide
Signed Kernel/Root Software Package was not installed, the telephone application attempts to
register with a call server.
Power-Up and Reset Process
When you plug the IP deskphone set into the Ethernet wall jack and apply power, if applicable,
the following process takes place.
Note:
Note:
If the application has already been downloaded, the whole process takes
approximately 1 to 2 minutes after the phone is plugged in. For software
upgrades, including the boot file and application file download, the process might
take 5 to 10 minutes. The duration is based on LAN loading, how many
telephones are being installed at once, and similar factors.
Do not unplug the power cord during the download process.
During hardware initialization, the system initialization values NVCONTRAST and
NVBRIGHTNESS are checked for non-null values, and set accordingly. The Avaya one-X™
name and logo display on sets with bit-mapped displays.
1. The system initialization value for the language file in use (NVLANGFILE) is checked for a
non-null value, in which case the text strings in that language file are used for text display.
Otherwise, English text strings are displayed.
2. The boot programs check the Kernel/Root File System that has previously been marked as
the one to be activated to ensure that it has not become corrupted, and if it has not,
transfers control to a process in that file system. If that file system is corrupted, the boot
program checks the other Kernel/Root File System. If that file system is not corrupted, it is
marked as the one to be activated, the value of RFSINUSE is set to the name of the Signed
Kernel/Root Software Package that was used to install that file system, and control is
transferred to it. If both Kernel/Root File Systems are corrupted, processing halts. The
software checks whether a Signed Application/Library Software Package has been
previously downloaded, and if one is found, the Application Software Package and/or the
Library Software Package is installed if either has a different file name than the currently
installed version, replacing the existing corresponding files in the Application File System.
The downloaded Signed Application/Library Software Package is then deleted. If a new
Signed Application/Library Software Package is not found, the integrity of the application
files is checked. If they are corrupted, files from the Backup Package are installed, replacing
the corrupted files in the Application File System. Any time an Application Software
Package or a Library Software Package is installed, the value of the persistent parameter
APPINUSE is set to the file name of the Application Software Package that was installed. If
the application files are not corrupted, or after the Backup Package has been installed,
control is transferred to the application installed in the Application File System. While
loading the application files into volatile memory and as control is transferred to them, the
value of the APPINUSE parameter is displayed on the bottom text line.
To Next Page
Loading...
Need help?
General
