Local Administrative (Craft) Options
48 9600 Series H.323 Deskphones Release 6.0 Installation and Maintenance Guide
Use this procedure to look at the language strings available on the telephone. A language string
is any set of words or phrases on the IP Telephone user interface, in the currently active
language.
1. When you select MLS from the Craft Local Procedure Screen, the following text displays:
where N is the label associated with a specific language in the downloaded language file
and text string is the wording associated with that Tag number.
2. Use the Up and Down navigation arrows to scroll through the list of text strings. Use the
Right and Left navigation arrows to scroll right or left one character at a time to view the
entire text string, if it exceeds the available display line space.
3. Press Back to return to the Craft Local Procedure screen.
Reset System Values
Note:
Note:
When updating local (Craft) procedures from a touchscreen deskphone, touching
the line you want to change or the applicable softkey produces the same result as
selecting a line and pressing the applicable softkey on a non-touchscreen IP
Deskphone.
Use the following procedure to reset all system initialization values to the application software
default values.
!
CAUTION:
CAUTION:
This procedure erases all static information, without any possibility of recovering
the data.
1. When you select RESET VALUES from the Craft Local Procedure Screen, the telephone
displays the following text:
2. Press Cancel to return to the Craft Local Procedure screen without resetting the telephone.
Press Reset to start the telephone reset.
The telephone resets from the beginning of registration, which might take a few minutes.
A reset:
●
Resets all system values and system initialization values except AUTH and NVAUTH to
default values.
Tag # N
Text string for tag #N text string
Press Reset to confirm.
To Next Page
Loading...
Need help?
General
