Local Administrative (Craft) Options
42 9600 Series H.323 Deskphones Release 6.0 Installation and Maintenance Guide
The CLEAR option erases all administered data—static programming, HTTP and HTTPS
server programming, and user settings including Contact button labels and locally programmed
Feature button labels, and restores all such data to default values. The CLEAR option does not
affect the software load itself. If you have upgraded the telephone, the telephone retains the
latest software. Once you have cleared a telephone, you can administer it normally.
!
CAUTION:
CAUTION:
This procedure erases all administered data, without any possibility of recovering
the data. Neither the boot code nor the application code is affected by this
procedure.
Note:
Note:
When updating local (Craft) procedures from a touchscreen deskphone, touching
the line you want to change or the applicable softkey produces the same result as
selecting a line and pressing the applicable softkey on a non-touchscreen IP
Deskphone.
Use the following procedure to clear the telephone of its administrative, user-assigned and
options values.
1. When you select CLEAR from the Craft Local Procedure Screen, the telephone displays the
prompt "Press Clear again to confirm."
2. If you do not want to clear all values, press Cancel to terminate the procedure and retain
the current values. Press Clear to clear all values to their initial default values.
The telephone displays the following text:
The telephone is cleared to its “out of the box” state, resetting the following values to their
factory defaults:
●
All system values and system initialization values.
●
802.1X identity and password.
●
User options, parameter settings, identifiers and password.
●
Any user data like Contact Lists or Call Logs are deleted.
After clearing the values, the telephone resets.
Clearing values...
To Next Page
Loading...
Need help?
General
