Parameter Description
be aware that the floor was granted to that participant
and react appropriately.
• TCP Preferred: Select to use TCP. If the request fails,
the system tries again using UDP. The request might
fail, for example, if the receiving endpoint only accepts
incoming connections over UDP.
• UDP Preferred: Select to use UDP once. If the request
fails, the system tries again using TCP. The request
might fail, for example, if the receiving endpoint only
accepts incoming connections over TCP.
• TCP Only: Select to only use TCP.
• UDP Only: Select to only use UDP.
4. From the web interface only, select Save.
5. (Optional) If you are securing SIP connections using TLS certificates, continue with Securing
Connections to the XT Series Using TLS on page 160.
Related Links
Initial Configuration of the XT Series on page 78
Registering the XT Series to a SIP Server
April 2015 Avaya Scopia
®
XT Series Deployment Guide 111
Comments? infodev@avaya.com
To Next Page
Loading...
