Avaya Scopia XT Executive - Remotely Controlling the XT Series with at Commands

Figure 103: Storing a camera preset
4. To save your choice on the endpoint, press ok/menu.
The position number of the preset turns blue, indicating it was successfully stored.
Figure 104: Camera position stored successfully on the endpoint interface
On the web interface, the Assigned column now contains a check mark.
5. To delete a previously stored position with the XT Remote Control Unit, press its number and
then press the Delete key.
From the web interface, select Delete on the row of the position number.
Related Links
Advanced Configuration of the XT Series on page 112
Remotely Controlling the XT Series with AT Commands
About this task
For complex room setups, you can remotely control your Avaya Scopia
®
XT Series from controllers
like
AMX, Creston or Extron devices which use a proprietary API known as AT commands. It has
Remotely Controlling the XT Series with AT Commands
April 2015 Avaya Scopia
®
XT Series Deployment Guide 149
Comments? infodev@avaya.com