Avaya Scopia XT Executive - Connecting Microphones and Speakers to the XT Series; Choosing a Microphone for Your XT Series

Connecting Microphones and Speakers to the XT Series
These sections describe how to connect audio equipment, such as the XT Digital Microphone Array
Pod, to the XT Codec Unit:
Related Links
Setting Up the XT Series Hardware on page 42
Choosing a Microphone for Your XT Series on page 59
Connecting a Microphone to the XT Series on page 62
Connecting Headphones or an Amplifier with Loudspeakers on page 64
Choosing a Microphone for Your XT Series
This section provides an overview of the different types of microphones which are shipped with the
various models in the Avaya Scopia
®
XT Series. You can add more microphones to your XT Series
depending on the room setup.
Figure 37: Choosing the microphone for your XT Series
To determine the best microphone positioning, see Planning the Optimal Room Setup on page 42.
When deciding on the microphone best suited for the meeting room, consider the following factors:
• A larger room requires more microphones. Position the microphones to ensure all participants
are within range.
Connecting Microphones and Speakers to the XT Series
April 2015 Avaya Scopia
®
XT Series Deployment Guide 59
Comments? infodev@avaya.com