If you have a monitor, you can find the IP address at the top bar of the endpoint's monitor.
Before you begin
Web access is enabled by default. If it was disabled, you can enable it and configure the security
details as described in
Securing Web Access to the XT Series on page 157.
Procedure
1. Open any of the supported internet browsers and access the XT Series login page by
entering the system's IP address, like http://1.2.3.4/.
Figure 50: Logging into the XT Series web interface
2. Enter the username and password.
The default username for the web interface is Admin with the password 1234.
Important:
We recommend changing the default credentials after logging in for the first time, as
described in the
Securing Web Access to the XT Series on page 157.
3. (Optional) Select the web interface language from the Language list.
4. Select Login.
Related Links
Controlling the XT Series on page 68
Managing Avaya Scopia
®
XT Series from Scopia
®
Management
About this task
Scopia
®
Management can manage all endpoints in a video network, including the Avaya Scopia
®
XT Series. Remote management is used for:
• Viewing Scopia
®
Management meeting schedules which include this endpoint as a participant.
• Recording meetings to your organization's Scopia
®
Desktop Content Center server.
• Centralizing upgrades and remote backups of the configuration settings of XT Series.
Controlling the XT Series
76 Avaya Scopia
®
XT Series Deployment Guide April 2015
Comments? infodev@avaya.com
To Next Page
Loading...
Need help?
General
