Avaya Scopia XT Executive - Connecting Avaya Scopia XT Series to the Network

If the monitor has visual preset modes, choose Cinema or Movie as the best choice for
videoconferencing.
If using the monitor's speakers, enable the monitor's noise reduction setting if available. See
the monitor's documentation for details.
Related Links
Setting Up the XT Series Hardware on page 42
Connecting Avaya Scopia
®
XT Series to the Network
About this task
Your Avaya Scopia
®
XT Series comes with two network ports (dual-NIC), where each is a GLAN or
gigabit LAN port, operating at speeds of 10 or 100 or 1000 megabits per second (Mbps).
Connect the network cable to the GLAN1
port.
If required, you can enable GLAN2 with a license to use both network ports (see Activating the
XT Series and its Optional Features on page 78).
For example, a small business can use the XT Series as a firewall traversal system (see Planning
NAT and Firewall Traversal with Avaya Scopia
®
XT Series on page 27), where the XT Series hosts
a call on its built-in MCU, and endpoints from both the public and private networks can access the
same videoconference. Connect one network port to the public network and the other to the private
network.
Another example of dual-NIC usage is when a large organization routes video on a higher
performance network, while routing the API control of the XT Series on another network.
Setting Up the XT Series Hardware
46 Avaya Scopia
®
XT Series Deployment Guide April 2015
Comments? infodev@avaya.com