Important:
To secure SIP connections using TLS certificates, your system must have a static IP
address, since the system generates the certificate request using its IP address as the
Common Name (CN).
This procedure removes the current certificate by replacing it with a blank form. To back up a
certificate before deleting it from the system, see
Backing Up and Restoring XT Series
Certificates on page 165.
Procedure
1. Access the XT Series web interface, as described in Accessing XT Series Web Interface on
page 75.
2. Select Administrator Settings > Utilities > Certificates.
3. Leave all fields blank and select Create to start a new CSR procedure. This erases the
previous certificates.
Figure 121: Removing Current Certificates
Related Links
Securing Connections to the XT Series Using TLS on page 160
Enabling the TLS Connection in XT Series
About this task
This procedure describes how to enable the system to use the TLS connection, which is required to
secure communications with other video network devices. TLS enables network devices to
communicate securely using certificates, to provide authentication of the devices and encryption of
the communication between them.
Securing Connections to the XT Series Using TLS
April 2015 Avaya Scopia
®
XT Series Deployment Guide 167
Comments? infodev@avaya.com
To Next Page
Loading...
