Avaya Scopia XT Executive Deployment Guide

With the gateway approach less communication lines are needed. As all gateways do not connect at
the same time and not all calls are ISDN, many more endpoints can share the same ISDN
connection and gateway.
Before you begin
Enable Peer-to-Peer mode in the Scopia
®
Gateway for ISDN. For more information, see the
Scopia
®
Gateway documentation.
Procedure
1. Access the XT Series web interface, as described in
Accessing XT Series Web Interface on
page 75.
2. Select Administrator Settings > Protocols > ISDN.
3. Configure the IDSN settings as described below:
Figure 14: Enabling ISDN connectivity
Table 5: Supporting ISDN Connectivity
Field Description
Enable Select Yes to allow this Avaya Scopia
®
XT Series to quickly dial
ISDN endpoints via the Scopia
®
Gateway for ISDN.
Gateway IP Address Enter the IP address of the Scopia
®
Gateway for ISDN used by
your organization.
4. Select Save.
Related Links
Planning the Topology of the Avaya Scopia
®
XT Series Deployment on page 24
Implementing External API Control
You can control the XT Codec Unit using the Avaya Scopia
®
XT Series API (requires integration
with AMX, Creston, or Extron control devices). Contact Avaya customer support to receive the
Reference Guide for Avaya Scopia
®
XT Series API, which includes the list of commands over the
Ethernet interface.
Related Links
Planning the Topology of the Avaya Scopia
®
XT Series Deployment on page 24
Planning the Topology of the Avaya Scopia
®
XT Series Deployment
30 Avaya Scopia
®
XT Series Deployment Guide April 2015
Comments? infodev@avaya.com

Avaya Scopia XT Executive Specifications

General

Brand	Avaya
Model	Scopia XT Executive
Category	Conference System
Language	English