Avaya Scopia XT Executive - Resolving Problems Viewing Computer Content

To Next Page

To Previous Page

Figure 148: Monitoring the status from the web interface

Not connect to network

Your computer or XT Series is not connected to the network.

Solution

Your DVI cable is not connected properly to the Scopia

XT Executive.

Verify that your computer is connected to the Scopia

XT Executive properly, as described in

Connecting a Computer to the XT Series on page 65.

1. Verify that your computer is connected to the network.

2. Verify that your XT Series is connected to the network by checking that the cables are

connected correctly (see

Setting Up the XT Series Hardware on page 42).

Another computer already connected

Another computer is already connected to the Scopia

XT Executive.

Solution

Verify that only your computer is connected by checking the XT Series web interface.

Authentication required

If using the Scopia

XT Executive as a room endpoint, the computer must be authenticated with

Scopia

XT Control each time it is connected. The

icon indicates that authentication is required.

Solution

Connect to Scopia

XT Control as described in User Guide for XT Series.

Other manuals for Avaya Scopia XT Executive