Avaya Scopia XT Executive - Configuring Advanced Regional Audio and Video Settings

Configuring Advanced Regional Audio and Video Settings
About this task
After you set the country and language of the device in the Quick Setup Wizard, the system defaults
to the audio and video standards of that country. This section details how to change those settings if
required.
Procedure
1. Access the XT Series web interface, as described in Accessing XT Series Web Interface on
page 75.
2. Select Administrator Settings > System > Location.
Figure 95: Setting regional information
3. Define regional settings as described in Table 39: Configuring regional information on
page 136.
Table 39: Configuring regional information
Field Name Description
System name Enter the name which appears in the local endpoint title bar and in the
remote endpoint interface (if connected).
Country Select the location of the XT Series. This populates the other fields
automatically.
Language Select the language used in the XT Series endpoint's interface.
Audio coding Select the European or US audio coding, used by audio equipment in
your location.
Video frequency The video refresh frequency depends on the country, and may be 50Hz or
60Hz. If you set it to <auto>, the system assigns the standard of the
chosen country.
Table continues…
Advanced Configuration of the XT Series
136 Avaya Scopia
®
XT Series Deployment Guide April 2015
Comments? infodev@avaya.com