Chapter 7: Advanced Configuration of the
XT Series
While the Quick Setup Wizard and some other settings enable you to deploy the Avaya Scopia
®
XT
Series in your organization, it has a significant array of advanced features which enable powerful
customization.
Related Links
Enabling Advanced Maintenance on the XT Series on page 112
Configuring Advanced System Name Settings on page 114
Configuring Advanced Network Settings on page 116
Setting Call Bandwidth in XT Series on page 127
Setting a Time Limit for Videoconferences on page 130
Configuring Advanced Sound (Audio Output) Settings on page 131
Configuring Advanced Regional Audio and Video Settings on page 136
Configuring Advanced Echo Cancellation on External Microphones on page 137
Configuring XT Series to use LDAP Directory on page 139
Configuring Advanced DTMF Settings on page 142
Enabling and Configuring Recording on page 144
Saving PTZ Camera Positions on page 147
Remotely Controlling the XT Series with AT Commands on page 149
Sending Status with SNMP on page 151
Updating the XT Series on page 153
Enabling Advanced Maintenance on the XT Series
About this task
To perform advanced configuration and maintenance from the endpoint itself, like upgrading the
firmware, you must first enable access to the advanced settings.
Before you begin
Ensure that you have the password to access the Advanced settings. The default password is
1234.
112 Avaya Scopia
®
XT Series Deployment Guide April 2015
Comments? infodev@avaya.com
To Next Page
Loading...
