Avaya Scopia XT Executive - Setting the System Name, Language, and Call Method

Figure 53: Accessing the Quick Setup
The quick setup wizard guides you through many of the following basic configuration tasks:
Related Links
Initial Configuration of the XT Series on page 78
Setting the System Name, Language, and Call Method on page 84
Adjusting the Image Position on page 86
Configuring Basic Network Settings on page 87
Configuring Basic Gatekeeper Settings on page 89
Configuring Basic SIP Settings on page 90
Installing Scopia
®
XT Control to Use Keyboard and Mouse (Scopia
®
XT Executive) on page 91
Setting Date and Time on page 93
Setting the Time Zone on page 94
Configuring the Screen Saver to Start Automatically on page 95
Setting the System Name, Language, and Call Method
About this task
The first screen in the Quick Setup wizard enables you to define the name of your Avaya Scopia
®
XT Series, the country, the menu language, and the protocol the system uses for calls. The unit's
name is displayed on the system's title bar and to other meeting participants. For example, Hong-
Kong, 9th-Floor-Room, or NY-Office. There is also a unicode system name to enable non-English
characters, available on the web interface only. For more advanced settings of the system name,
see
Configuring Advanced System Name Settings on page 114.
After initial setup, you can modify these settings by selecting Configure > General from the
endpoint's menus, or from the web interface select Basic Settings > Preferences > General.
Before you begin
Access the quick setup wizard from the endpoint or web interface, as described in
Configuring Basic
Settings with the Quick Setup Wizard on page 83.
Initial Configuration of the XT Series
84 Avaya Scopia
®
XT Series Deployment Guide April 2015
Comments? infodev@avaya.com