Table 45: Typical file sizes based on the bitrate
Bitrate File size for 1 minute
recording
File size for 30 minute
recording
File size for 1 hour
recording
6144K 45 MB 1,350 MB 2,700 MB
4096K 30 MB 900 MB 1,800 MB
2048K 15 MB 450 MB 900 MB
1024 7.5 MB 225 MB 450 MB
512 3.75 MB 112.5 MB 225 MB
384 3 MB 85 MB 169 MB
3. From the web interface only, select Save.
Related Links
Advanced Configuration of the XT Series on page 112
Saving PTZ Camera Positions
About this task
You can change your PTZ camera's position before or during a call and save that position for later
use as one of several presets. You can store up to 10 positions on the new XT Remote Control Unit
from the endpoint interface, or dozens more from the web interface or using the previous XT
Remote Control Unit.
You can also recall presets for remote cameras if they support FECC. Far End Camera Control
(FECC) is a feature of endpoint cameras, where the camera can be controlled remotely by another
endpoint in the call.
Procedure
1. To recall a position and move the camera quickly to a preset:
• From the new XT Remote Control Unit, press and hold the position number.
• From the previous XT Remote Control Unit, press Select then enter the position number,
up to two digits. * indicates 10, # indicates 11.
• From the XT Series web interface, select More Actions located just under the tabs, then
select Control Camera, and press Select on the row of the position number.
Saving PTZ Camera Positions
April 2015 Avaya Scopia
®
XT Series Deployment Guide 147
Comments? infodev@avaya.com
To Next Page
Loading...
