Figure 79: Selecting the system name
2. Enter the following settings:
Table 26: Setting the display name
Field Description
System Name Display
Mode
Select the criterion for the system to display its name:
• Select Automatic to automatically choose the name based on deployment, first
displaying the SIP username if registered to a SIP registrar or proxy, and if
unavailable, it displays the H.323 name if registered to a gatekeeper, and if
unavailable it displays the unicode name.
• Select System Name Unicode to display the System Name Unicode field, which
allows non-alphanumeric characters such as Chinese or Japanese.
• Select SIP: to display the SIP username, used to register your system to the SIP
server. This is the same as the System Name, unless you change it manually (see
Registering the XT Series to a SIP Server on page 107).
• Select H.323 to display the H.323 name, used to register your system to the
gatekeeper. This is the same as the System Name, unless you change it manually
(see Configuring Advanced Gatekeeper Settings on page 124).
• Select System Name to display the System Name field, which supports only
alphanumeric characters.
• Select Hostname to display the Hostname field. This is typically the same as the
System Name, unless the System Name includes characters not supported by
the hostname standard. Invalid characters are replaced by the - character.
System Name This field displays the initial name you entered during the Quick Setup Wizard (as
described in Setting the System Name, Language, and Call Method on page 84). If
you selected this option from the System Name Display Mode list, you can modify
the display name (optional). You can only enter alphanumeric characters.
Table continues…
Configuring Advanced System Name Settings
April 2015 Avaya Scopia
®
XT Series Deployment Guide 115
Comments? infodev@avaya.com
To Next Page
Loading...
