Figure 139: Enabling the Moving setting from the web interface
2. Make sure that the Moving field is set to Yes.
3. From the web interface only, select Save.
Receiving resolution
The resolution you can receive has not been configured correctly.
Solution
If configuring from the endpoint, you must first enable advanced configuration, as described in
Enabling Advanced Maintenance on the XT Series on page 112.
1. Access the video settings. From the XT Series web interface, select Administrator
Settings > Calls > Preferences > Video. From the endpoint's main menu, select
Configure > Advanced > Calls > Preferences > Video.
Troubleshooting the Avaya Scopia
®
XT Series
188 Avaya Scopia
®
XT Series Deployment Guide April 2015
Comments? infodev@avaya.com
To Next Page
Loading...
