Before you begin
Verify that you have the following:
• Access to the
Avaya Product Licensing and Delivery System.
If you do not have access, navigate to Avaya's login page and follow the instructions on the
page. If you do not have login information for Avaya's login page, contact your Avaya Support
Representative.
• The endpoint’s host ID (MAC address of the GLAN 1 port), located in your customer letter. You
can also find this information from one of the endpoint’s interfaces. For example, when you
start the Avaya Scopia
®
XT Series without a license, you can click Activate License on the
Enable Software Version screen to view the host ID. Alternatively, you can click Start Demo
Version to run the software without a license for 30 days. On the demo version, you can
navigate to Configure > About. For more information on this method, see
Viewing System
Information for Customer Support on page 172. The host ID is also displayed on the XT Series
web interface when you log on to http://<XT Series IP address> with the username
Admin and the password 1234. When you log on, click Licenses. You can also use the
Licenses page to enable your license once you receive it from PLDS.
• A License Activation Code (LAC) to activate the product itself and any optional features you
purchased. You can find the LAC in the customer letter shipped with the product, or the email
you received when you purchased the product or optional license.
Procedure
1. Obtain the product’s license keys from the Avaya Product Licensing and Delivery System, as
follows:
a. Access the
Avaya Product Licensing and Delivery System.
b. Using your license activation code (LAC) and your endpoint’s host ID, obtain the license
key as described in Getting Started with Avaya PLDS.
The LAC generates a license key to activate the product, as well as any optional
licenses you ordered when purchasing the product. If you purchased optional licenses
separately, perform this step for each license you purchased, using its unique LAC.
Note:
If the LAC is not recognized by the Avaya Product Licensing and Delivery System,
use the following alternative method:
From the Avaya Product Licensing and Delivery System Home page, navigate to
Asset > View Entitlements > Search Entitlements. Search for your LAC by
entering it in the %LAC field. From the Options menu, click Activate. During the
Activation Wizard, you must manually create a new MAC address (Host ID).
c. Write down the license keys, required to activate the endpoint and its optional features.
2. Activate the license and/or optional features on your XT Series:
a. From the XT Series web interface, select Enable License on the home page. From the
endpoint's main menu, select Configure > Advanced > Utilities > Licenses.
Initial Configuration of the XT Series
82 Avaya Scopia
®
XT Series Deployment Guide April 2015
Comments? infodev@avaya.com
To Next Page
Loading...
