2. To dial a recently contacted endpoint, access the recent calls list. From the Avaya XT
Series web interface, select Make your call > Basic Options > Recent Calls. From the
endpoint's main menu, select Call , or press on the XT Remote Control Unit.
Select the entry to dial, and then select Call or press ok/menu on the XT Remote Control
Unit.
3. To dial a saved contact, access the list of contacts. From the Avaya XT Series web
interface, select Make your call > Basic Options > Contacts. From the endpoint's main
menu, select Contacts.
Select the entry to dial, and then select Call or press ok/menu on the XT Remote Control
Unit.
4. To join a meeting hosted elsewhere, call the endpoint or Media Server which hosts the
meeting, using any of the above dial methods.
5. To host a meeting on your built-in Media Server by dialing out to other participants:
a. Call the first participant.
b. Call others to join. From the Avaya XT Series web interface, select Make your Call >
Basic Options > Direct Call / Contacts. From the endpoint, within the meeting with
the first participant, press ok/menu and select Participants > Invite a new
participant > By Address / From Contacts.
Figure 21: Invite Participant
c. Select a contact or enter a dial string to call the next participant.
d. Repeat to add more participants.
6. To host a meeting on your built-in Media Server by giving your endpoint's contact details,
be sure to give the correct information.
To accept an incoming call, select Accept.
Starting a New Call
March 2021 User Guide for Avaya XT Series 56
Comments on this document? infodev@avaya.com
To Next Page
Loading...
